Cognito Alpha Ball Joint for Cognito Upper Control Arms for 99-18 Silverado/Sierra 1500 Trucks Rating: 100% of100

$94.95

Details:

  • The ultimate heavy duty upper ball joint for IFS suspension

  • High angle to accomodate more suspension travel

  • Durability of a ball joint with performance of a uni-ball

  • Bootless seal, protection from weather without risk of torn boots

  • Greasable, internal grease cavity retains lubricant

  • Rebuildable in the vehicle if ever needed

  • Zinc plated corrosion resistant housing

  • Alloy joint for maximum longevity, no plastic liner

  • Greater pullout strength than plastic lined ball joints

  • Pre-greased with Lithium Complex Grade 2 Grease

  • Patented (U.S. Pat. 10,731,700)

Details

While ball joints are a wear item, that wear is accelerated by larger tires, high cornering loads, damaged dust/grease boots, and a lack of lubrication. It is well known that most lube shops are not tending to greaseable joints during maintenance, therefore a lack of lubrication causing prematurely worn ball joints has been an issue for the last decade or more. 

Maintenance free ball joints the refore seem like a great solution, unfortunately there are factors that can cause issues. If a dust/grease boot is compromised on a maintenance free joint allowing contamination inside, grease can't be pumped in from the top to flush out contaminants and re-lubricate the joint. The plastic liner of the joint then wears and creates a squeaky joint that needs replaced. Replacing a traditional press in ball joint takes time and can be a pain in the rear without the proper specialty tools.

The patented Cognito Alpha Ball Joint is the next level, end-all be-all solution of upper ball joints. It eliminates the problematic dust/grease boot by using a durable scraper type seal that is not susceptible to damage that a traditional dust/grease boot is. Although the ball joint is firmly sealed and pre-greased, there is a grease fitting at top for any periodic maintenance needed. With a small internal cavity for grease, the joint does not need much at all. The internals are alloy steel, absent of any plastic liner, with alloy races and grease paths. The carburized and surface coated taper pin is a precise fit, has an oversized sphere in the socket for large contact surface providing excellent strength and wear characteristics. 

With a 4 year warranty against defects and premature wear, and having a heavy duty design, this is still a joint and thus still a wear item. Being a press in ball joint, you would think it will be a pain to freshen up, but the Alpha Ball Joint is rebuildable and simple to do with a rebuild kit. The ease of rebuilding stems from the corrosion resistant zinc plated housing of the ball joint remaining in the control arm. The ball joint can be rebuilt in the control arm without even having to remove the control arm from the truck. Once the taper pin is removed from the spindle, the top cap of the ball joint is removed followed by all the internal components. The rebuild kit comes with all new internal alloy races, a taper pin, and new scraper seal. Those items are installed with grease, the cap fastened back in place, and then the taper pin re-fastened to the spindle, and that’s it!

Shipping Specs

Lead Time: Quick Ship

Weight: 7.000000

Compatibility

2015-2020 GMC Yukon XL SLT

2015-2020 GMC Yukon XL SLE

2015-2020 GMC Yukon XL Denali

2000-2020 GMC Yukon SLT

2000-2020 GMC Yukon SLE

2000-2020 GMC Yukon Denali

2012-2020 Chevrolet Tahoe SSV

2017-2020 Chevrolet Tahoe Premier

2012-2020 Chevrolet Tahoe PPV

2000-2020 Chevrolet Tahoe LT

2000-2020 Chevrolet Tahoe LS

2017-2020 Chevrolet Suburban Premier

2014-2020 Chevrolet Suburban LT

2015-2020 Chevrolet Suburban LS

2016-2019 Chevrolet Suburban HD

2019 Chevrolet Silverado 1500 LDWT

2019 Chevrolet Silverado 1500 LDLT

2019 Chevrolet Silverado 1500 LD Custom

2008-2018 GMC Sierra Denali

2014-2018 GMC Sierra All Terrain

1999-2018 GMC Sierra 1500 SLT

1999-2018 GMC Sierra 1500 SLE

2002-2018 GMC Sierra 1500 Denali

2002-2018 GMC Sierra 1500 Base

2018 Chevrolet Tahoe Midnight Edition

2002-2018 Chevrolet Silverado 1500 WT

2015-2018 Chevrolet Silverado 1500 SSV

2007-2018 Chevrolet Silverado 1500 LTZ

1999-2018 Chevrolet Silverado 1500 LT

1999-2018 Chevrolet Silverado 1500 LS

2014-2018 Chevrolet Silverado 1500 High Country

2002-2018 Chevrolet Silverado 1500 Custom

2014-2017 GMC Sierra SLE

2000-2017 Chevrolet Tahoe Z71

2007-2016 Chevrolet Tahoe LTZ

2015-2016 Chevrolet Suburban LTZ

1999-2016 Chevrolet Silverado 1500 Base

2000-2014 GMC Yukon XL 1500 SLT

2000-2014 GMC Yukon XL 1500 SLE

2001-2014 GMC Yukon XL 1500 Denali

2010-2014 GMC Sierra SLT

2006-2014 Chevrolet Suburban 1500 LTZ

2000-2014 Chevrolet Suburban 1500 LT

2000-2014 Chevrolet Suburban 1500 LS

2008-2013 GMC Yukon Hybrid

2010-2013 GMC Yukon Denali Hybrid

2010-2013 GMC Sierra 1500 XFE

2002-2013 GMC Sierra 1500 WT

1999-2013 GMC Sierra 1500 SL

2008-2013 Chevrolet Tahoe Hybrid

2010-2013 Chevrolet Silverado 1500 XFE

2004-2013 Chevrolet Silverado 1500 Hybrid

2007-2012 GMC Yukon Base

2007-2012 GMC Sierra Base

2000-2012 Chevrolet Tahoe Base

2000-2012 Chevrolet Suburban 1500 Base

2007 GMC Sierra 1500 Classic WT

2007 GMC Sierra 1500 Classic SLT

2007 GMC Sierra 1500 Classic SLE

2007 GMC Sierra 1500 Classic SL

2007 GMC Sierra 1500 Classic Denali

2004-2007 Chevrolet Suburban 1500 Z71

2007 Chevrolet Silverado 1500 Classic WT

2007 Chevrolet Silverado 1500 Classic SS

2007 Chevrolet Silverado 1500 Classic LT

2007 Chevrolet Silverado 1500 Classic LS

2007 Chevrolet Silverado 1500 Classic Hybrid

2006 GMC Yukon XL 1500 SL

2006 GMC Yukon SL

2005-2006 GMC Sierra 1500 Hybrid

2003-2006 Chevrolet Silverado 1500 SS

2004 Chevrolet Silverado 1500 Z71

2002 GMC Sierra 1500 HT

2001 GMC Sierra 1500 C3

2000 Chevrolet Tahoe Limited

Details:

  • The ultimate heavy duty upper ball joint for IFS suspension

  • High angle to accomodate more suspension travel

  • Durability of a ball joint with performance of a uni-ball

  • Bootless seal, protection from weather without risk of torn boots

  • Greasable, internal grease cavity retains lubricant

  • Rebuildable in the vehicle if ever needed

  • Zinc plated corrosion resistant housing

  • Alloy joint for maximum longevity, no plastic liner

  • Greater pullout strength than plastic lined ball joints

  • Pre-greased with Lithium Complex Grade 2 Grease

  • Patented (U.S. Pat. 10,731,700)

Details

While ball joints are a wear item, that wear is accelerated by larger tires, high cornering loads, damaged dust/grease boots, and a lack of lubrication. It is well known that most lube shops are not tending to greaseable joints during maintenance, therefore a lack of lubrication causing prematurely worn ball joints has been an issue for the last decade or more. 

Maintenance free ball joints the refore seem like a great solution, unfortunately there are factors that can cause issues. If a dust/grease boot is compromised on a maintenance free joint allowing contamination inside, grease can't be pumped in from the top to flush out contaminants and re-lubricate the joint. The plastic liner of the joint then wears and creates a squeaky joint that needs replaced. Replacing a traditional press in ball joint takes time and can be a pain in the rear without the proper specialty tools.

The patented Cognito Alpha Ball Joint is the next level, end-all be-all solution of upper ball joints. It eliminates the problematic dust/grease boot by using a durable scraper type seal that is not susceptible to damage that a traditional dust/grease boot is. Although the ball joint is firmly sealed and pre-greased, there is a grease fitting at top for any periodic maintenance needed. With a small internal cavity for grease, the joint does not need much at all. The internals are alloy steel, absent of any plastic liner, with alloy races and grease paths. The carburized and surface coated taper pin is a precise fit, has an oversized sphere in the socket for large contact surface providing excellent strength and wear characteristics. 

With a 4 year warranty against defects and premature wear, and having a heavy duty design, this is still a joint and thus still a wear item. Being a press in ball joint, you would think it will be a pain to freshen up, but the Alpha Ball Joint is rebuildable and simple to do with a rebuild kit. The ease of rebuilding stems from the corrosion resistant zinc plated housing of the ball joint remaining in the control arm. The ball joint can be rebuilt in the control arm without even having to remove the control arm from the truck. Once the taper pin is removed from the spindle, the top cap of the ball joint is removed followed by all the internal components. The rebuild kit comes with all new internal alloy races, a taper pin, and new scraper seal. Those items are installed with grease, the cap fastened back in place, and then the taper pin re-fastened to the spindle, and that’s it!

Shipping Specs

Lead Time: Quick Ship

Weight: 7.000000

Compatibility

2015-2020 GMC Yukon XL SLT

2015-2020 GMC Yukon XL SLE

2015-2020 GMC Yukon XL Denali

2000-2020 GMC Yukon SLT

2000-2020 GMC Yukon SLE

2000-2020 GMC Yukon Denali

2012-2020 Chevrolet Tahoe SSV

2017-2020 Chevrolet Tahoe Premier

2012-2020 Chevrolet Tahoe PPV

2000-2020 Chevrolet Tahoe LT

2000-2020 Chevrolet Tahoe LS

2017-2020 Chevrolet Suburban Premier

2014-2020 Chevrolet Suburban LT

2015-2020 Chevrolet Suburban LS

2016-2019 Chevrolet Suburban HD

2019 Chevrolet Silverado 1500 LDWT

2019 Chevrolet Silverado 1500 LDLT

2019 Chevrolet Silverado 1500 LD Custom

2008-2018 GMC Sierra Denali

2014-2018 GMC Sierra All Terrain

1999-2018 GMC Sierra 1500 SLT

1999-2018 GMC Sierra 1500 SLE

2002-2018 GMC Sierra 1500 Denali

2002-2018 GMC Sierra 1500 Base

2018 Chevrolet Tahoe Midnight Edition

2002-2018 Chevrolet Silverado 1500 WT

2015-2018 Chevrolet Silverado 1500 SSV

2007-2018 Chevrolet Silverado 1500 LTZ

1999-2018 Chevrolet Silverado 1500 LT

1999-2018 Chevrolet Silverado 1500 LS

2014-2018 Chevrolet Silverado 1500 High Country

2002-2018 Chevrolet Silverado 1500 Custom

2014-2017 GMC Sierra SLE

2000-2017 Chevrolet Tahoe Z71

2007-2016 Chevrolet Tahoe LTZ

2015-2016 Chevrolet Suburban LTZ

1999-2016 Chevrolet Silverado 1500 Base

2000-2014 GMC Yukon XL 1500 SLT

2000-2014 GMC Yukon XL 1500 SLE

2001-2014 GMC Yukon XL 1500 Denali

2010-2014 GMC Sierra SLT

2006-2014 Chevrolet Suburban 1500 LTZ

2000-2014 Chevrolet Suburban 1500 LT

2000-2014 Chevrolet Suburban 1500 LS

2008-2013 GMC Yukon Hybrid

2010-2013 GMC Yukon Denali Hybrid

2010-2013 GMC Sierra 1500 XFE

2002-2013 GMC Sierra 1500 WT

1999-2013 GMC Sierra 1500 SL

2008-2013 Chevrolet Tahoe Hybrid

2010-2013 Chevrolet Silverado 1500 XFE

2004-2013 Chevrolet Silverado 1500 Hybrid

2007-2012 GMC Yukon Base

2007-2012 GMC Sierra Base

2000-2012 Chevrolet Tahoe Base

2000-2012 Chevrolet Suburban 1500 Base

2007 GMC Sierra 1500 Classic WT

2007 GMC Sierra 1500 Classic SLT

2007 GMC Sierra 1500 Classic SLE

2007 GMC Sierra 1500 Classic SL

2007 GMC Sierra 1500 Classic Denali

2004-2007 Chevrolet Suburban 1500 Z71

2007 Chevrolet Silverado 1500 Classic WT

2007 Chevrolet Silverado 1500 Classic SS

2007 Chevrolet Silverado 1500 Classic LT

2007 Chevrolet Silverado 1500 Classic LS

2007 Chevrolet Silverado 1500 Classic Hybrid

2006 GMC Yukon XL 1500 SL

2006 GMC Yukon SL

2005-2006 GMC Sierra 1500 Hybrid

2003-2006 Chevrolet Silverado 1500 SS

2004 Chevrolet Silverado 1500 Z71

2002 GMC Sierra 1500 HT

2001 GMC Sierra 1500 C3

2000 Chevrolet Tahoe Limited

WARNING: This ball joint is not to be used as a droop limiter and was never designed to support suspension components hanging from the ball joint during operation. Doing so will void any warranty and is an extreme safety risk.

WARNING: On 2014-2018 models, this ball joint is only compatible on vehicles equipped with OEM Cast Steel Control Arms.