Note: The stock front driveline is not supported in this kit for 4WD trucks only. Ensure you add one of these CV Front Driveline upgrades for proper installation.
Each Kit Features:
Yields 12-inches of front lift
Deaver leaf pack with Cognito Block and U-Bolt Kit yields 9-inches of rear
SM Series Upper Control Arms
SM Series Compression Struts
Patented Pitman and Idler Arm Support Kit
Elka 2.5 Reservoir Shocks
Forged Torsion Bar Keys
Stainless Steel Braided Brake Lines
Maintains Adequate Droop Travel for Superior Ride Quality
Levels Vehicle Front to Rear
19-Hour DIY Install Time
Made in the USA
Details
We have bundled everything you need in a lift kit for your 20-24 GM 2500/3500 with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA. The Cognito 12-Inch Elite Lift Kit with 2.5 Elka Reservoir Shocks is designed and engineered to offer superior ride quality and corrected CV joint angles. The Cognito Ball Joint SM Series Upper Control Arms add style, function, and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality. The control arm kit features boxed sheet metal arms that are welded, and powder coated semi-gloss black. Pre-installed maintenance free ball joints and pivot bushings are included. The Cognito Pitman Idler Arm Support Kit: Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades. The Cognito PISK (Pitman Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of GM trucks and SUVs. These improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicle's pitman and idler arms, which eliminate the forward and rearward movement of the center-link. The Elka 2.5 Reservoir shock allows precise fine-tuning of the high-& low-speed compression damping so you can adapt the suspension for your specific driving style and terrain conditions without compromise. It also features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. The Deaver spring is a complete replacement of the OEM spring, and is arched for 4-Inch over stock rear lift height while maintaining an excellent ride quality via being made from high quality spring steel, a higher leaf count with thinner leaf material for a more compliant ride. The Cognito 5-inch Block and U-Bolt Kit includes 5-inch tall powder coated semi-gloss black steel blocks and heavy-duty zinc plated U-bolts.
Tire Fitment
Allows for up to a 40 x 13.5-Inch Tire on a 10-inch Wide Wheel with 4.5-inch Backspacing
Shipping Specs
Lead Time: Ships in 1-2 Weeks
Weight: 708.000000
Compatibility
2020-2025 GMC Sierra 3500 HD SLT
2020-2025 GMC Sierra 3500 HD SLE
2023-2025 GMC Sierra 3500 HD Pro
2024-2025 GMC Sierra 3500 HD Denali Ultimate
2020-2025 GMC Sierra 3500 HD Denali
2020-2025 GMC Sierra 3500 HD AT4
2020-2025 GMC Sierra 2500 HD SLT
2020-2025 GMC Sierra 2500 HD SLE
2023-2025 GMC Sierra 2500 HD Pro
2024-2025 GMC Sierra 2500 HD Denali Ultimate
2020-2025 GMC Sierra 2500 HD Denali
2020-2025 GMC Sierra 2500 HD AT4
2020-2025 Chevrolet Silverado 3500 HD WT
2020-2025 Chevrolet Silverado 3500 HD LTZ
2020-2025 Chevrolet Silverado 3500 HD LT
2020-2025 Chevrolet Silverado 3500 HD High Country
2020-2025 Chevrolet Silverado 3500 HD Base
2020-2025 Chevrolet Silverado 2500 HD WT
2020-2025 Chevrolet Silverado 2500 HD LTZ
2020-2025 Chevrolet Silverado 2500 HD LT
2020-2025 Chevrolet Silverado 2500 HD High Country
2020-2025 Chevrolet Silverado 2500 HD Custom
2020-2022 GMC Sierra 3500 HD Base
2020-2022 GMC Sierra 2500 HD Base
2020 GMC Sierra 3500 HD
2020 GMC Sierra 2500 HD
Note: The stock front driveline is not supported in this kit for 4WD trucks only. Ensure you add one of these CV Front Driveline upgrades for proper installation.
Each Kit Features:
Yields 12-inches of front lift
Deaver leaf pack with Cognito Block and U-Bolt Kit yields 9-inches of rear
SM Series Upper Control Arms
SM Series Compression Struts
Patented Pitman and Idler Arm Support Kit
Elka 2.5 Reservoir Shocks
Forged Torsion Bar Keys
Stainless Steel Braided Brake Lines
Maintains Adequate Droop Travel for Superior Ride Quality
Levels Vehicle Front to Rear
19-Hour DIY Install Time
Made in the USA
Details
We have bundled everything you need in a lift kit for your 20-24 GM 2500/3500 with high quality Cognito components. There is no guesswork. Cognito components are engineered, manufactured, and assembled in the USA. The Cognito 12-Inch Elite Lift Kit with 2.5 Elka Reservoir Shocks is designed and engineered to offer superior ride quality and corrected CV joint angles. The Cognito Ball Joint SM Series Upper Control Arms add style, function, and performance to your vehicle by correcting the Ball Joint angle for lifted and leveled applications and improving the allowable droop travel for a better ride quality. The control arm kit features boxed sheet metal arms that are welded, and powder coated semi-gloss black. Pre-installed maintenance free ball joints and pivot bushings are included. The Cognito Pitman Idler Arm Support Kit: Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades. The Cognito PISK (Pitman Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of GM trucks and SUVs. These improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicle's pitman and idler arms, which eliminate the forward and rearward movement of the center-link. The Elka 2.5 Reservoir shock allows precise fine-tuning of the high-& low-speed compression damping so you can adapt the suspension for your specific driving style and terrain conditions without compromise. It also features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. The Deaver spring is a complete replacement of the OEM spring, and is arched for 4-Inch over stock rear lift height while maintaining an excellent ride quality via being made from high quality spring steel, a higher leaf count with thinner leaf material for a more compliant ride. The Cognito 5-inch Block and U-Bolt Kit includes 5-inch tall powder coated semi-gloss black steel blocks and heavy-duty zinc plated U-bolts.
Tire Fitment
Allows for up to a 40 x 13.5-Inch Tire on a 10-inch Wide Wheel with 4.5-inch Backspacing
Shipping Specs
Lead Time: Ships in 1-2 Weeks
Weight: 708.000000
Compatibility
2020-2025 GMC Sierra 3500 HD SLT
2020-2025 GMC Sierra 3500 HD SLE
2023-2025 GMC Sierra 3500 HD Pro
2024-2025 GMC Sierra 3500 HD Denali Ultimate
2020-2025 GMC Sierra 3500 HD Denali
2020-2025 GMC Sierra 3500 HD AT4
2020-2025 GMC Sierra 2500 HD SLT
2020-2025 GMC Sierra 2500 HD SLE
2023-2025 GMC Sierra 2500 HD Pro
2024-2025 GMC Sierra 2500 HD Denali Ultimate
2020-2025 GMC Sierra 2500 HD Denali
2020-2025 GMC Sierra 2500 HD AT4
2020-2025 Chevrolet Silverado 3500 HD WT
2020-2025 Chevrolet Silverado 3500 HD LTZ
2020-2025 Chevrolet Silverado 3500 HD LT
2020-2025 Chevrolet Silverado 3500 HD High Country
2020-2025 Chevrolet Silverado 3500 HD Base
2020-2025 Chevrolet Silverado 2500 HD WT
2020-2025 Chevrolet Silverado 2500 HD LTZ
2020-2025 Chevrolet Silverado 2500 HD LT
2020-2025 Chevrolet Silverado 2500 HD High Country
2020-2025 Chevrolet Silverado 2500 HD Custom
2020-2022 GMC Sierra 3500 HD Base
2020-2022 GMC Sierra 2500 HD Base
2020 GMC Sierra 3500 HD
2020 GMC Sierra 2500 HD
Note: The stock front driveline is not supported in this kit for 4WD trucks only. Ensure you add one of these CV Front Driveline upgrades for proper installation.
